How to Compare Galvanized Iron Pipe Price for Tee 130

Check the tee size first

Tee 130 is available in sizes from 1/4 inch to 6 inches. The size must match the connected pipe and the branch shown in the piping layout. If an order includes several sizes, send a line-by-line schedule so we can quote each tee correctly.

A useful purchasing request names the required nominal size for every tee. This prevents a general galvanized iron pipe price from being compared with a quotation covering different sizes or quantities.

Match the thread system

Thread compatibility is a primary selection criterion. Tee 130 uses threaded male and female connections, with thread references including ISO 7/1, ANSI/ASME B1.20.1, and DIN 2999.

Choose the thread system that matches the connected pipe and the project standard. British, American, and DIN standards are available within the fitting range. Include the required system in the inquiry instead of requesting a general price for a galvanized tee.

Select the surface finish for the installation

Tee 130 is available with a hot-dipped galvanized surface or a black surface. Choose the galvanized finish when the piping specification calls for a galvanized fitting or when the installation requires the specified surface treatment. Choose the black finish when the project calls for black fittings.

For a water, oil, air, steam, or gas line, include the conveyed medium with the tee size and finish. The medium and the operating conditions help define whether the selected fitting matches the intended pipe connection.

Compare working pressure and test pressure separately

Tee 130 has a listed working pressure of 1.6 MPa and a test pressure of 2.5 MPa. Use the working-pressure value when checking the fitting against normal service conditions. The test-pressure value is used for testing and should not be treated as the normal operating limit.

The fitting has a tensile strength of at least 33 kg/mm², elongation of at least 8%, and hardness below HB150. These mechanical values can be included in the same purchasing comparison as size, thread, finish, medium, and quantity.

What to include in a price request

Send these details when asking us for a galvanized iron pipe price:

• Tee 130 and the required quantity
• Nominal size for each tee, from 1/4 inch to 6 inches
• ISO 7/1, ANSI/ASME B1.20.1, or DIN 2999 thread requirement
• British, American, or DIN dimensional standard
• Hot-dipped galvanized or black surface
• Conveyed medium and required working pressure
• Packaging requirements for the order

Our Galvanized Malleable Iron Pipe Fitting Tee 130 page provides the product reference for your inquiry. We can review a schedule containing several sizes and finishes so the quotation matches the planned piping list.

Which buyer should choose Tee 130?

Choose the galvanized version of Tee 130 when your project needs a threaded branch fitting with a hot-dipped galvanized surface, a size within the 1/4 inch to 6 inch range, and a defined international thread system. It fits buyers who already know the pipe size, conveyed medium, pressure requirement, and dimensional standard.

Choose the black version when the project specification calls for a black surface. For either finish, compare the planned service pressure with the listed 1.6 MPa working pressure and identify the thread system before comparing quotations.

To obtain a comparable galvanized iron pipe price, send us the tee size schedule, thread standard, surface finish, conveyed medium, working pressure, quantity, and packaging requirement.